Source Code for Module SCons.Errors

  1  # 
  2  # Copyright (c) 2001 - 2015 The SCons Foundation 
  3  # 
  4  # Permission is hereby granted, free of charge, to any person obtaining 
  5  # a copy of this software and associated documentation files (the 
  6  # "Software"), to deal in the Software without restriction, including 
  7  # without limitation the rights to use, copy, modify, merge, publish, 
  8  # distribute, sublicense, and/or sell copies of the Software, and to 
  9  # permit persons to whom the Software is furnished to do so, subject to 
 10  # the following conditions: 
 11  # 
 12  # The above copyright notice and this permission notice shall be included 
 13  # in all copies or substantial portions of the Software. 
 14  # 
 15  # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY 
 16  # KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE 
 17  # WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 
 18  # NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE 
 19  # LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION 
 20  # OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION 
 21  # WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 
 22  # 
 23   
 24  """SCons.Errors 
 25   
 26  This file contains the exception classes used to handle internal 
 27  and user errors in SCons. 
 28   
 29  """ 
 30   
 31  __revision__ = "src/engine/SCons/Errors.py rel_2.4.0:3365:9259ea1c13d7 2015/09/21 14:03:43 bdbaddog" 
 32   
 33  import SCons.Util 
 34   
 35  import exceptions 
 36   
 37 -class BuildError(Exception): 
 38      """ Errors occuring while building. 
 39   
 40      BuildError have the following attributes: 
 41   
 42          Information about the cause of the build error: 
 43          ----------------------------------------------- 
 44   
 45          errstr : a description of the error message 
 46   
 47          status : the return code of the action that caused the build 
 48                   error. Must be set to a non-zero value even if the 
 49                   build error is not due to an action returning a 
 50                   non-zero returned code. 
 51   
 52          exitstatus : SCons exit status due to this build error. 
 53                       Must be nonzero unless due to an explicit Exit() 
 54                       call.  Not always the same as status, since 
 55                       actions return a status code that should be 
 56                       respected, but SCons typically exits with 2 
 57                       irrespective of the return value of the failed 
 58                       action. 
 59   
 60          filename : The name of the file or directory that caused the 
 61                     build error. Set to None if no files are associated with 
 62                     this error. This might be different from the target 
 63                     being built. For example, failure to create the 
 64                     directory in which the target file will appear. It 
 65                     can be None if the error is not due to a particular 
 66                     filename. 
 67   
 68          exc_info : Info about exception that caused the build 
 69                     error. Set to (None, None, None) if this build 
 70                     error is not due to an exception. 
 71   
 72   
 73          Information about the cause of the location of the error: 
 74          --------------------------------------------------------- 
 75   
 76          node : the error occured while building this target node(s) 
 77           
 78          executor : the executor that caused the build to fail (might 
 79                     be None if the build failures is not due to the 
 80                     executor failing) 
 81           
 82          action : the action that caused the build to fail (might be 
 83                   None if the build failures is not due to the an 
 84                   action failure) 
 85   
 86          command : the command line for the action that caused the 
 87                    build to fail (might be None if the build failures 
 88                    is not due to the an action failure) 
 89          """ 
 90   
 91 -    def __init__(self,  
 92                   node=None, errstr="Unknown error", status=2, exitstatus=2, 
 93                   filename=None, executor=None, action=None, command=None, 
 94                   exc_info=(None, None, None)): 
 95           
 96          self.errstr = errstr 
 97          self.status = status 
 98          self.exitstatus = exitstatus 
 99          self.filename = filename 
100          self.exc_info = exc_info 
101   
102          self.node = node 
103          self.executor = executor 
104          self.action = action 
105          self.command = command 
106   
107          Exception.__init__(self, node, errstr, status, exitstatus, filename,  
108                             executor, action, command, exc_info) 
109   
110 -    def __str__(self): 
111          if self.filename: 
112              return self.filename + ': ' + self.errstr 
113          else: 
114              return self.errstr 
115   
116 -class InternalError(Exception): 
117      pass 
118   
119 -class UserError(Exception): 
120      pass 
121   
122 -class StopError(Exception): 
123      pass 
124   
125 -class EnvironmentError(Exception): 
126      pass 
127   
128 -class MSVCError(IOError): 
129      pass 
130   
131 -class ExplicitExit(Exception): 
132 -    def __init__(self, node=None, status=None, *args): 
133          self.node = node 
134          self.status = status 
135          self.exitstatus = status 
136          Exception.__init__(self, *args) 
137   
138 -def convert_to_BuildError(status, exc_info=None): 
139      """ 
140      Convert any return code a BuildError Exception. 
141   
142      `status' can either be a return code or an Exception. 
143      The buildError.status we set here will normally be 
144      used as the exit status of the "scons" process. 
145      """ 
146      if not exc_info and isinstance(status, Exception): 
147          exc_info = (status.__class__, status, None) 
148   
149      if isinstance(status, BuildError): 
150          buildError = status 
151          buildError.exitstatus = 2   # always exit with 2 on build errors 
152      elif isinstance(status, ExplicitExit): 
153          status = status.status 
154          errstr = 'Explicit exit, status %s' % status 
155          buildError = BuildError( 
156              errstr=errstr, 
157              status=status,      # might be 0, OK here 
158              exitstatus=status,      # might be 0, OK here 
159              exc_info=exc_info) 
160      elif isinstance(status, (StopError, UserError)): 
161          buildError = BuildError( 
162              errstr=str(status), 
163              status=2, 
164              exitstatus=2, 
165              exc_info=exc_info) 
166      elif isinstance(status, exceptions.EnvironmentError): 
167          # If an IOError/OSError happens, raise a BuildError. 
168          # Report the name of the file or directory that caused the 
169          # error, which might be different from the target being built 
170          # (for example, failure to create the directory in which the 
171          # target file will appear). 
172          try: filename = status.filename 
173          except AttributeError: filename = None 
174          buildError = BuildError(  
175              errstr=status.strerror, 
176              status=status.errno, 
177              exitstatus=2, 
178              filename=filename, 
179              exc_info=exc_info) 
180      elif isinstance(status, Exception): 
181          buildError = BuildError( 
182              errstr='%s : %s' % (status.__class__.__name__, status), 
183              status=2, 
184              exitstatus=2, 
185              exc_info=exc_info) 
186      elif SCons.Util.is_String(status): 
187          buildError = BuildError( 
188              errstr=status, 
189              status=2, 
190              exitstatus=2) 
191      else: 
192          buildError = BuildError( 
193              errstr="Error %s" % status, 
194              status=status, 
195              exitstatus=2) 
196       
197      #import sys 
198      #sys.stderr.write("convert_to_BuildError: status %s => (errstr %s, status %s)"%(status,buildError.errstr, buildError.status)) 
199      return buildError 
200   
201  # Local Variables: 
202  # tab-width:4 
203  # indent-tabs-mode:nil 
204  # End: 
205  # vim: set expandtab tabstop=4 shiftwidth=4: 
206